Filter
Top Products
i
Answering System
For assistance, please visit http://www.panasonic.com/phonehelp 85
For Voice Mail service subscribers
If you subscribe to a flat-rate bundle
service that includes Caller ID, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please note
the following:
L To use the Voice Mail service provided
by your telephone company rather than
the unit’s answering system, turn off the
answering system (page 79).
This unit does not have an indicator to
indicate if there are new messages in
your mailbox service.
L To use this unit’s answering system
rather than the Voice Mail service
provided by your telephone company,
please contact your telephone company
to deactivate your Voice Mail service.
If your telephone company cannot do
this:
– Set this unit’s “Ring count” setting
so that this unit’s answering system
answers calls before your telephone
company’s Voice Mail service tries to
answer your calls. It is necessary to
check the ring count required to
activate the Voice Mail service
provided by your telephone company
before changing this setting.
– Change the ring count of the Voice
Mail service so that the answering
system can answer the call first. To do
so, consult your telephone company.
Caller’s recording time o
You can change the maximum message
recording time allotted to each caller.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 {MENU} i A i {SET}
2 “Recording time” i {SET}
3 Select the desired line.
4 Select the desired setting. (Default:
“3min”) i {SET} i {STOP}
Note:
L If the message memory becomes full,
the unit automatically switches to the
“Greeting only” mode. New
messages will not be recorded.
Recording mode o
You can select a recording mode.
Enhanced recording provides improved
sound quality, but the total recording
capacity is reduced.
1 {MENU} i A i {SET}
2 “Recording mode” i {SET}
3 Select the desired item. (Default:
“Standard recording 60min”) i
{SET} i {STOP}
Call screening o
This feature allows you to monitor a
message from the speaker when the
answering system is recording the
message.
1 {MENU} i A i {SET}
2 “Call screening” i {SET}
3 Select the desired item. (Default: “On”)
i {SET} i {STOP}