Filter
Top Products
Using a Cellular Phone with this Unit
86 For assistance, please visit http://www.panasonic.com/phonehelp
Configuring a cellular
phone
If your cellular phone is Bluetooth wireless
technology compatible to the home
communication system, you can use the
handset or base unit to make or answer
calls using a cellular line.
This feature is useful for maximizing the
benefits of cellular services (such as free
unlimited nights and weekends, or cellular
to cellular calling plans) by utilizing unused
peak minutes with your home phone.
To use this feature you must first:
– register your cellular phone to the base
unit (page 86).
– turn on discoverable mode (page 86).
– connect the cellular phone to the base
unit (page 87).
Important:
L The following procedures must be
performed using the base unit.
L Up to 5 cellular phones can be
registered (when other Bluetooth
devices are not registered). There can
be only one active Bluetooth connection
at a time.
L To keep the cellular line stable between
the base unit and cellular phone, we
recommend you use a cellular phone
within the range of the base unit.
L While you are on a cellular call, the
battery of your cellular phone is being
consumed. We recommend you place
your cellular phone on its charger during
the call.
Registering a cellular phone o
Important:
L For more details and the list of
compatible cellular phones, please visit:
www.panasonic.com/MultiTalkV
L Before registering a Bluetooth device to
the base unit, we recommend you
change the PIN (page 76).
1 Base unit:
{CELLULAR}
2 “Registration” i {SET}
L After pressing {SET}, the rest of the
procedure must be completed within
2 minutes.
3 Your cellular phone:
Follow the instructions of your cellular
phone to enter the registration mode.
L Depending on your cellular phone, it
may ask you to enter the base unit
PIN (Default: “7262”).
Note:
L To cancel a cellular phone from the base
unit, see “Deregistering another device”
on page 78.
Turning on the discoverable
mode o
When discoverable mode is turned on, this
unit may be seen by other Bluetooth
devices.
1 {MENU} i h i {SET}
2 “Bluetooth” i {SET}
3 “Discoverable” i {SET}
4 Select the desired setting. (Default:
“On”) i {SET} i {STOP}