Filter
Top Products
Useful Information
For assistance, please visit http://www.panasonic.com/phonehelp 107
Phonebook
Caller ID
I cannot turn the clarity
booster feature on.
L The resources available for wireless communication
(making or answering calls with another handset,
monitoring camera images from a computer, etc.) are
limited. Wait for the other user to end the operation and
try again.
The interrupt tones sound
while I am on an outside
call or on an intercom call
or monitoring a room.
L A call is being received. Press {OFF} to end the call or
stop monitoring, then answer the call.
Problem Cause & solution
Copying stopped with an
item displayed.
L The destination handset may have lost communication
with the base unit, or the destination unit user may have
pressed {C} or {s} on the handset or {SP-PHONE}
on the base unit.
The displayed phonebook item was not copied to the
unit. Press {OFF} on the handset or {STOP} on the
base unit. Confirm that the destination unit is not in use
and try again.
Problem Cause & solution
The handset or base unit
does not display the
caller’s name and/or
phone number.
L You have not subscribed to Caller ID service. Contact
your telephone company to subscribe.
L If your base unit is connected to any additional
telephone equipment such as a Caller ID box or
cordless telephone jack, disconnect the base unit from
the equipment and plug the base unit directly into the
wall jack.
L If your base unit is connected to a telephone line with
DSL service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
L The name display service may not be available in some
areas. Contact your telephone company for details.
L Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
L The caller requested not to send caller information
(page 40).
L If a call is being transferred to you, the caller information
is not displayed.
Problem Cause & solution