Programmable Settings
For assistance, please visit http://www.panasonic.com/phonehelp 77
Call reservation o
The resources available for wireless
communication (making or answering calls
with a handset, monitoring camera images
from a computer, etc.) are limited. When
this feature is turned on, the system will
limit data communications and reserve
enough resources so that 1 handset can
always make or answer outside calls.
When this feature is turned off, data
communications will not be limited, but it is
possible that calls cannot be made or
answered with a handset when data traffic
is heavy.
1 {MENU} i h i {SET}
2 “Call reservation” i {SET}
3 Select the desired item. (Default: “On”)
i {SET} i {STOP}
Customer support Y o
The handset and base unit can display the
Internet address where you can download
the operating instructions or get further
information for this product using your
computer.
1 {MENU} (F2) i x i {SELECT}
2 “Customer support” i {SELECT}
L The Internet address is displayed.
3 {OFF}
1 {MENU} i h i {SET}
2 “Customer support” i {SET}
L The Internet address is displayed.
3 {STOP}
Registering a unit
Registering the handset Y o
The included handset and base unit are
preregistered. If for some reason the
handset is not registered to the base unit,
register the handset.
Important:
L Before registering a compatible
Panasonic unit to the base unit, we
recommend you change the PIN (page
76) so that other Bluetooth devices in
the area are not accidentally registered
at the same time.
L If you have already canceled the
handset registration at the previous
base unit, perform steps 2 and 3 only.
1 Handset:
{MENU} (F2) i x i {SELECT}
i “Registration” i {SELECT}
i “Registration” i {SELECT}
2 Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
L After {INTERCOM} starts flashing,
the rest of the procedure must be
completed within 2 minutes.
3 Handset:
Press {OK}, then wait until the handset
beeps.
L If you have changed the PIN, enter it
and press {OK}, then wait until the
handset beeps.
Handset
Base unit