Filter
Top Products
Programmable Settings
78 For assistance, please visit http://www.panasonic.com/phonehelp
Registering a cordless camera
jo
The included cordless camera and base
unit are preregistered. If for some reason
the cordless camera (for example, the
indicator flashes rapidly in red) is not
registered to the base unit, register the
cordless camera.
1 Base unit:
Press and hold {INTERCOM} until it
starts flashing and a beep sounds.
2 Cordless camera:
Press PROG. (program) on the back
side of the cordless camera with a
pointed object such as pen until a beep
sounds and the indicator on the
cordless camera turns yellow-green
and starts flashing.
L When the registration is done
successfully, the cordless camera
beeps and the indicator stops
flashing but remains lit up (page 24).
Resetting the cordless camera
If you reset the cordless camera, the
cordless camera is canceled from the base
unit.
Press and hold PROG. (program) on the
back side of the cordless camera with a
pointed object such as pen until a beep
sounds.
With the pen still holding PROG., wait until
the indicator on the cordless camera starts
flashing in yellow-green then turns into
orange (flashing).
When resetting is completed, the indicator
flashes rapidly in red.
Note:
L When the resetting is completed, all the
images in the cordless camera are
erased.
L To use the cordless camera after
resetting, you need to deregister to
erase the cordless camera information
from the base unit and then reregister it
to the base unit.
Deregistering a unit
Deregistering a handset
A handset can cancel its own registration.
1 {MENU} (F2) i x i {SELECT}
2 “Registration” i {SELECT}
3 “Deregistration” i {SELECT}
4 {3}{3}{5} i {OK}
Deregistering another device
The base unit can cancel a registered unit
(cordless camera, USB adaptor, Bluetooth
cellular phone, Bluetooth headset).
1 {MENU} i h i {SET}
2 “Deregistration” i {SET}
3 Select the desired device. i {SET}
4 {3}{3}{5} i {SET} i {STOP}
Handset
Base unit