Filter
Top Products
Programmable Settings
76 For assistance, please visit http://www.panasonic.com/phonehelp
Handset memory status Y
You can confirm the amount of handset
memory used for your images and songs.
The images and songs are stored in the
same memory (in addition to the preset
images and songs). A maximum of 98
images and a maximum of 20 songs can
be stored. The number of stored images
and songs may decrease depending on
the size of each file, the number of files,
etc.
Memory usage
1 {MENU} (F2) i x i {SELECT}
2 “Memory status” i {SELECT}
L The memory status is displayed.
3 {OFF}
Changing the PIN (personal
identification number) o
For security, the PIN must be entered
when changing certain settings such as
registering units. The default setting is
“7262”.
Important:
L If you change the PIN, please make note
of your new PIN. The unit does not
reveal the PIN to you.
1 {MENU} i h i {SET}
2 “Set PIN” i {SET}
3 To change the PIN for the first time, skip
to step 4.
To change the PIN, enter the current 4-
digit PIN. i {SET}
4 Enter the new 4-digit PIN. i {SET}
5 Enter the new 4-digit PIN again. i
{SET} i {STOP}
If you forget the PIN (resetting the base
unit to its default settings)
If you set the PIN and you cannot
remember it, you can reset the base unit
using the following procedures.
Base unit:
{MENU} i {MUTE} i
{#}{9}{0}{0}{0}
Note:
L The following items are reset to their
default settings:
– Settings checked in the base reset
column on page 122
– Answering system: On
– Line selection for answering system:
Line 1 and line 2
L If you have registered a cellular phone,
the following cellular phone settings are
also reset to their default settings.
–“Assign Base/HS” (Allows you to
select which unit to ring for cellular
calls, page 91): “All”
–“TAD (cell)” (Answering system for
cellular phone, page 91): “Off”
–“TAD ring count” (Ring count of
answering system for cellular phone,
page 91): “4”
File type Quantity Memory
used
Image 1 image 1 %
Song 30 seconds 27 %