Filter
Top Products
Transferring calls / 77
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
2. If you are not reconnected to your original call, press
and then press the line key of the original call, which is
now on hold.
Displays
You are talking to the person you want to
transfer the call to. Press RETRY
if you decide
to transfer the call to someone else. Press
or JOIN
to transfer the call.
The person to whom you tried to transfer a
call did not answer. Press CALLBACK
or the
flashing line button to reconnect to the call.
On the M7100 telephone, lift the receiver.
The person to whom you tried to transfer a
call has Do Not Disturb active on their
telephone. Press JOIN
to transfer the call
anyway. Press RETRY
to transfer the call to
someone else. Press CANCL
or the flashing
line button to reconnect to the call (on the
M7100 telephone, press
).
You entered an invalid internal number.
Press RETRY
and enter the number again.
The external caller you were transferring
hung up before the transfer was complete.
Press JOIN to transfer the call on line 001 to
telephone 221. Press RETRY
if, after talking to
the person at extension 221, you decide to
transfer the call to someone else.
The telephone to which you are trying to
transfer a call is out of service.
You cannot transfer the call because of
telephone or line restrictions.
Complete the transfer in progress before you
access a new feature, answer another
alerting call or select an outgoing line.
221>222
CANCL RETRY JOIN
221 no reply
CALLBACK
Do not disturb
CANCL RETRY JOIN
Invalid number
CANCL RETRY
Line001 hung up
Line001>221
CANCL RETRY JOIN
Not in service
CANCL RETRY
Restricted call
CANCL RETRY
Still in trnsfer
CANCL RETRY
p0881591.book Page 77 Wednesday, August 19, 1998 6:43 PM