Filter
Top Products
144 / Programming Hunt Groups
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Programming the overflow set
This setting allows you to program the overflow set to which
the Hunt Group calls are to be routed. Unless the overflow
position is a Hunt Group set, the call ceases to be a Hunt Group
call. If the overflow set is a Hunt Group set, the call is treated
as a new call and goes to the bottom of the queue.
The overflow set can be a set DN number associated with a
voice mailbox.
1. Place the programming overlay on any M7310 or M7324
telephone.
2. Press (CONFIG).
The display shows Password:.
3. Press (SCPLUS). The display shows
Terminals&Sets.
4. Press until the display shows System
prgrming.
5. Press . The display shows Hunt groups.
6. Press . The display shows Show group.
7. Enter the Hunt Group number you want to program (1-30).
8. Press . The display shows Member DNs:.
9. Press . The display shows Overflow:.
10. Press . The display shows Overflow:HGn.
11. Press CHANGE
to change the overflow position.
12. Enter the new overflow position.
13. Press to exit or to continue programming.
p0881591.book Page 144 Wednesday, August 19, 1998 6:43 PM