Filter
Top Products
Using System features / 169
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Viewing the active Services from a two-line display
telephone
When a Service is active, the control telephone display reads
Services ON.
1. Press LIST
. The display shows the first active Service and
the schedule that is in use.
2. If there are several active Services, press NEXT
to see them
all.
3. Press EXIT
to exit the feature.
Viewing the active Services from a one-line display
telephone
1. Press . The display shows the first
active Service.
2. Press to move through the active schedule.
3. Press to exit.
Do not confuse activating Normal service with
canceling a Service.
Setting a Service to Normal is not the same as
canceling a Service using a feature code. If you set
the Service to Normal, the normal version of a
Service overrides any automatic schedule and
remains in effect until you manually cancel it. If you
cancel the Service, you return to the automatic
schedule.
p0881591.book Page 169 Wednesday, August 19, 1998 6:43 PM