Filter
Top Products
90 / Forwarding your calls
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
6. Press CHANGE to select Y (Yes) or N (No).
Turning the redirect ring for a telephone on or off
You can program a telephone to ring briefly (200
milliseconds) when a call is redirected on one of its lines.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press .
2. Press (the default System Coordinator
password).
3. Press and enter the internal number of the
telephone you want to program.
4. Press twice.
5. Press three times. The display reads
Redirect ring:.
6. Press CHANGE
to select Y (Yes) or N (No).
Displays while redirecting lines
Tip -
If a telephone has redirect ring enabled, it rings
briefly for redirected calls on one of its lines even if another
telephone set up the line redirection.
You selected the intercom button as the
facility to place the call on. Enter a line pool
code or a destination code.
Press or ADD to begin redirection. Press
or REMOVE
to cancel a previous
redirection.
Intercom
Line Redirection
QUIT ADD REMOVE
p0881591.book Page 90 Wednesday, August 19, 1998 6:43 PM