Filter
Top Products
Forwarding your calls / 91
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
You have one external line on your
telephone, but you need a second line to
perform line redirection. Redirect your
external line using a line pool as the outgoing
line.
You are attempting to redirect a line and the
line you have chosen is the outgoing line you
have selected as a destination. You cannot
redirect a line to itself. Select another line.
Enter a valid line pool access code.
You have attempted to redirect a line, but
someone else has already redirected that
line. Press or OVERRIDE
to override the
previous redirection and redirect the line as
you want.
You can redirect calls only on individual
lines.
Select the line that is used to redirect calls
out of the system.
Press the lines to be redirected. To undo a
line selection, press it again. Press ALL
to
redirect all your lines.
Continue to press the lines to be redirected.
Press or OK
when you are
finished.
The line you are attempting to redirect
cannot be redirected because the hardware
does not support redirection.
No line to use
Outgoing line
Pool code: ___
QUIT
Redir by 221
OVERRIDE
Redirect denied
Select line out
QUIT
Select line(s)
QUIT ALL
Select line(s)
ALL OK
Unequipped line
p0881591.book Page 91 Wednesday, August 19, 1998 6:43 PM