Filter
Top Products
16 / Frequently used programming operations
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Note: CLASS Trunks are required for this feature to work.
Consult your customer service representative to
determine if you have CLASS Trunks.
This feature also allows the automatic changing between North
American daylight savings and standard time. Your system uses
the time and date information from the first incoming call after
two rings to update to daylight savings or standard time.
The Automatic Time and Date feature automatically overrides
any manually programmed changes to the time and date in your
system.
Note: The year is not included with the time and date
information and must be programmed manually if the
current year differs from the network time.
Programming Automatic Time and Date
You can program the Automatic Time and Date feature to enable
your system to automatically update the time and date after a
power failure, and to automatically change between daylight
savings and standard time.
Press .
Press .
Press .
The passwords can be changed. See “Using passwords” on page 171 for more
information.
Jan 1 12:00pm
Feature:
Password:
RETRY
p0881591.book Page 16 Wednesday, August 19, 1998 6:43 PM