Filter
Top Products
Using System features / 181
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
Preventing a telephone from using Link
Link can be restricted at individual telephones. You need the
programming template found at the front of this guide. See
“Getting started with Norstar” on page 1 for more
information.
1. Press .
2. Press (the default System Coordinator
password).
3. Press and enter the internal number of the
telephone you want to program.
4. Press .
5. Press three times. The display reads
Restrictions.
6. Press twice.
7. Press three times. The display reads Allow
link:.
8. Press CHANGE
to choose Y (Yes) or N (No).
Pause
The Pause feature enters a 1.5 second delay in a dialing
sequence on an external line. This is often required for
signaling remote devices, such as answering machines, or
when reaching through to PBX features or host systems.
Tip -
If your Norstar system is connected to a private
branch exchange (PBX), program Link onto a memory
button for one-touch access.
p0881591.book Page 181 Wednesday, August 19, 1998 6:43 PM