Filter
Top Products
174 / Using System features
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can
clear it in programming. The individual can then enter a new
password from his or her telephone.
You need the programming template found at the front of this
guide. See “Getting started with Norstar” on page 1 for more
information.
1. Press .
2. Press (the default System Coordinator
password).
3. Press four times.
4. Press at Passwords.
5. Press until the display reads Call log pswds.
6. Press and enter the internal telephone number
of the telephone where you want to clear the Call Log
password.
7. Press , then press CLR
to clear the password.
Using special telephones
Direct-dial
You can reach the direct-dial telephone by dialing a single
digit. The direct-dial telephone is usually in a central location,
such as a attendant’s desk. You can have up to five direct-dial
telephones for your Norstar system. It is usually the prime
telephone or the central answering position (CAP).
The direct-dial telephone can send up to 30 messages and can
invoke Services to activate the extra-dial telephone.
p0881591.book Page 174 Wednesday, August 19, 1998 6:43 PM