Filter
Top Products
118 / Customizing your telephone
Modular ICS 4.0 System Coordinator Guide P0881591 Issue 01
Applying button cap labels
Before you apply button labels, activate the Button Inquiry
feature ( ) to verify the button functions, and
to avoid activating features as you put the labels onto the
buttons. For more information refer to “Finding out what a
button does using Button Inquiry” on page 115.
If you are checking a speed dial button, enter
the two-digit speed dial code that you want to
check.
Enter the feature code, or press or QUIT
to quit programming or CLEAR
to clear the
numbers you have entered. The system
accepts the entry as soon as you enter a
valid feature code.
Press and enter the feature code
you want to assign to the button. You cannot
enter invalid codes.
You have programmed a button with a
feature that was already programmed onto
another button. The feature has moved to the
button you just programmed. Its original
button is now blank.
Press the button you want to check. Press
or EXIT
when you are finished.
Enter the number you want to program and
press . To erase the button, just
press .
Enter the number you want to program and
press OK
. To erase the button, just press
or OK
.
For other displays, see “Common feature displays” on page 203.
Enter code:
F__
QUIT CLEAR
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT OK
p0881591.book Page 118 Wednesday, August 19, 1998 6:43 PM