Filter
Top Products
Frequently used programming operations / 15
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
The clock controls the schedules used for services such as ringing
and routing services.
After a power failure, the clock is behind by the length of time
power was lost. For example, if the power is out for two minutes,
the clock is two minutes behind.
You can program your Norstar system with the Automatic Time
and Date feature to automatically update the time and date.
Whenever the clock is out of sync by more than two minutes, as
a result of a power failure or a loss of power, the first incoming
call updates the clock automatically after two rings.
Press CHANGE.
Press the dial pad buttons to enter the month.
Use numbers for the months: 01 is January; 12 is December.
Press NEXT.
Press CHANGE.
Press the dial pad buttons to enter the day.
Press to end your session.
Month:01
NEXT CHANGE
Month:___
CANCL
Month:07
NEXT CHANGE
Day:01
NEXT CHANGE
Day:___
CANCL
Day:15
CANCL
End of session
p0881591.book Page 15 Wednesday, August 19, 1998 6:43 PM