Filter
Top Products
User Preferences / 131
P0881591 Issue 01 Modular ICS 4.0 System Coordinator Guide
7. Press and choose the line (or enter a code for a
line pool) the speed dial code should use.
Use the line pool code to select a particular line pool for use
with Speed Dial. If you select Use routing tbl, a line or pool
is chosen by the routing programming according to the initial
digits in the number.
The route you choose for a User Speed Dial code must be one
that the telephone can use. For example, if the telephone does
not have access to Line Pool B and you use that pool code with
the speed dial code, the code does not work.
To change a system speed dial code, see “Adding or changing
a system speed dial” on page 17.
Changing Call Log options
1. Press at Call log opt’ns….
2. Press CHANGE
until you see the option you want to use. See
“Call Log options” on page 108.
Changing how calls are dialed
1. Press at Dialing opt’ns….
2. Press CHANGE
until you see the option you want to use.
Descriptions for dialing options are found on the
Telephone
Feature Card
, or see “Changing how you dial your calls” on
page 57.
Changing the language used on the display
Press CHANGE
at Language: until you see the language you
want to use. See “Changing the language on the display” on
page 116.
p0881591.book Page 131 Wednesday, August 19, 1998 6:43 PM