Filter
Top Products
3-22
Catalyst 2950 Desktop Switch Software Configuration Guide
78-11380-05
Chapter 3 Getting Started with CMS
Menus and Toolbar
Device Popup Menus
Specific devices in the Topology view display a specific popup menu:
• Cluster (Table 3-16)
• Command switch (Table 3-17)
• Member or standby command switch (Table 3-18)
• Candidate switch with an IP address (Table 3-19)
• Candidate switch without an IP address (Table 3-20)
• Neighboring devices (Table 3-21)
Note The Device Manager option in these popup menus is available in read-only mode on Catalyst 2900 XL
and Catalyst 3500 XL switches running Release 12.0(5)WC2 and later. It is also available on
Catalyst 2950 switches running Release 12.1(6)EA2 and later and on Catalyst 3550 switch running
Release 12.1(8)EA1 or later. It is not available on the Catalyst 1900 and Catalyst 2820 switches.
To display a device popup menu, click an icon, and right-click.
Table 3-16 Device Popup Menu of a Cluster Icon
Popup Menu Option Task
Expand cluster View a cluster-specific topology view.
Properties Display information about the device.
Table 3-17 Device Popup Menu of a Command-Switch Icon
Popup Menu Option Task
Collapse cluster View the neighborhood outside a specific cluster.
Host Name
1
1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the “Access
Modes in CMS” section on page 3-29.
Change the host name of a switch.
Bandwidth Graphs Display graphs that plot the total bandwidth in use by the switch.
Properties Display information about the device.
Table 3-18 Device Popup Menu of a Member or Standby Command-Switch Icon
Popup Menu Option Task
Remove from Cluster
1
1. Available only from a cluster-management session.
Remove a member from the cluster.
Host Name
1
Change the host name of a switch.
Device Manager
2
2. Available from a cluster member switch but not from the command switch.
Launch Device Manager for a switch.
Bandwidth Graphs Display graphs that plot the total bandwidth in use by the switch.
Properties Display information about the device.