Filter
Top Products
5-7
Catalyst 2950 Desktop Switch Software Configuration Guide
78-11380-05
Chapter 5 Configuring IE2100 CNS Agents
Configuring CNS Embedded Agents
Note For more information about running the setup program and creating templates on the Configuration
Registrar, refer to the Cisco Intelligence Engine 2100 Series Configuration Registrar Manual.
DHCP server
• IP address assignment
• TFTP server IP address
• Path to bootstrap configuration file on the TFTP server
• Default gateway IP address
TFTP server
• Create a bootstrap configuration file that includes the CNS
configuration commands that enable the switch to
communicate with the IE2100 Configuration Registrar.
• Configure the switch to use either the switch MAC address or
the serial number (instead of the default host name) to
generate the configID and eventID.
• Configure the CNS event agent to push the configuration file
to the switch.
IE2100 Configuration Registrar Create one or more templates for each type of device, and map the
configID of the device to the template.
Table 5-1 Prerequisites for Enabling Automatic Configuration (continued)
Device Required Configuration