Cisco Systems 2950 Telephone User Manual


 
24-8
Catalyst 2950 Desktop Switch Software Configuration Guide
78-11380-05
Chapter 24 Configuring Network Security with ACLs
Configuring ACLs
ACL Numbers
The number you use to denote your ACL shows the type of access list that you are creating. Table 24-2
lists the access list number and corresponding type and shows whether or not they are supported by the
switch. The switch supports IP standard and IP extended access lists, numbers 1 to 199 and 1300 to 2699.
Note In addition to numbered standard and extended ACLs, you can also create named standard and extended
IP ACLs by using the supported numbers. That is, the name of a standard IP ACL can be 1 to 99; the
name of an extended IP ACL can be 100 to 199. The advantage of using named ACLs instead of
numbered lists is that you can delete individual entries from a named list.
Table 24-2 Access List Numbers
ACL Number Type Supported
199 IP standard access list Yes
100199 IP extended access list Yes
200299 Protocol type-code access list No
300399 DECnet access list No
400499 XNS standard access list No
500599 XNS extended access list No
600699 AppleTalk access list No
700799 48-bit MAC address access list No
800899 IPX standard access list No
900999 IPX extended access list No
10001099 IPX SAP access list No
11001199 Extended 48-bit MAC address access list No
12001299 IPX summary address access list No
13001999 IP standard access list (expanded range) Yes
20002699 IP extended access list (expanded range) Yes