Filter
Top Products
Receiving Calls
Using Your 4630/4630SW IP Telephone
2-8 Issue 2.0 December 2003
Retrieving the held call 2
Select (press) the call appearance line of the held call.
The call is now active.
Mute 2
During an active call, the Mute feature prevents the party with whom you are
speaking from hearing you. This feature is most commonly used in conjunction
with the Speakerphone. You can also use Mute to hold an off-line conversation at
any time during a call.
Preventing the other person on the line from hearing you 2
1. Press the Mute ( ) button next to the dialpad.
The other party cannot hear you. The indicator next to the Mute button
lights.
2. To reinstate two-way conversation, press the Mute ( ) button again.
Redial 2
The Redial feature either automatically dials the most recent number dialed or
displays the last eight outgoing calls for selection of the number to be dialed. What
you see when you select this feature depends on how you have set up your Redial
option (as covered in 4630/4630SW IP Telephone Options
). This section
describes both procedures.
Redialing the last number called 2
Select the Redial ( ) Feature button.
The last number dialed is automatically redialed.
NOTES:
• If all call appearance lines are in use, the Redial feature will not proceed
with dialing or allow selection of a number to be redialed from the Redial
screen.
• Your Telephone Administrator can turn off the ability to Redial, or can
restrict your phone to dialing only the last number called. If the Redial fea-
ture has been turned off, pressing the Redial button has no effect. If the
Redial feature has been restricted to only the last number dialed, follow
the Redialing the last number called
instructions below.