Filter
Top Products
Introducing Your 4630/4630SW IP Telephone
4630/4630SW IP Telephone Applications
Issue 2.0 December 2003
1-13
2. Depending on which screen is displayed, choose one of the following
options:
3. To make or answer a call while the display is locked, lift the handset,
activate the headset, or activate the Speaker button as you normally
would. If your System Administrator has set up an Emergency number, it
will be available on the Locked screen at the touch of the red-labeled
button. If your System Administrator has not set up an Emergency number,
no such button is displayed.
4. To unlock your screen, see the next procedure, Unlocking the Display
.
Unlocking the Display 1
1. To unlock the screen display and restore normal application screens, at the
“THE DISPLAY SCREEN HAS BEEN LOCKED” screen, select Password:.
2. Using the dialpad, enter your PBX/switch registration password. Select
Backspace to erase incorrect entries, one character at a time.
3. When the password is correct, select Enter.
If the Password entered matches your PBX/switch registration password on
the server, the display unlocks. If the passwords do not match, the
message “Incorrect Password. Try again.” displays.
4. Repeat Step 2 if your password was incorrect.
The Phone application screen displays.
If this screen is displayed Then
THE DISPLAY
SCREEN IS LOCKED
The 4630 display area is protected from
access. (The telephony capability is active,
meaning you may make or receive calls
while the display is locked, but you do not
have access to Phone Feature buttons
such as Transfer or Redial.)
Screen Lock
Password Verification
Be sure you know your PBX/switch
registration password (or contact your
System Administrator to obtain it). Then
select the Password field, enter your
password using the phone’s dialpad, and
select Enter.
If the Password entered matches your
PBX/switch registration password on the
server, the Screen Lock screen displays. If
the password does not match, the
message “Incorrect Password. Try again.”
displays.
Re-enter your password if it was incorrect.