Filter
Top Products
Introduction System Specification
Compact Contact Center Installation & Maintenance
40DHB0002USBG Issue 1 (11/14/2001) Introduction
•
Page 6
Connecting the CCC Server
The LAN provides connection between the IP400 and the CCC Server. It
will support 10/100 Mbps connection. The length of cable is dependent on
structured cabling and speed.
Wallboard Devices
Wallboard 22
Specification
Voltage
220/240V AC OR 110V AC. (Check label on rear of
wallboard)
Wattage 108W
Cold Start Inrush
Current
30A for up to 6ms
Baud Rate 9600 only
Input RS 485
Weight 6 kg
Dimensions L 1097 x D 75 x H 198 mm
Installation power distribution circuit rating to be greater than 6 amp, any
circuit breakers must be capable of handling the cold start inrush current
without tripping. For details of Wallboard 22 Installation see "Wallboard 22"
on page 6.
Wallboard 10
Specification
Voltage Check label on rear of wallboard
Wattage 35W
Cold Start Inrush
Current
30A for up to 6ms
Baud Rate 9600 only
Input RS 485
Weight 4 kg
Dimensions L 469 x D 75 x H 123 mm
Installation power distribution circuit rating to be greater than 6 amp, any
circuit breakers must be capable of handling the cold start inrush current
without tripping. For details of Wallboard 10 Installation see " Wallboard
10" on page 40.