Filter
Top Products
Wallboard Installation and Maintenance Wallboard 10
Compact Contact Center Installation & Maintenance
40DHB0002USBG Issue 1 (11/14/2001) Wallboard Installation and Maintenance
•
Page 40
Wallboard 10
Introduction
The Wallboard 10 is a single line display consisting of 10 tri-color
characters. It connects via a multi-drop circuit to the host PC running the
Wallboard Server application.
The display wallboard consists of the following assemblies.
Housing: A housing, which is manufactured from an aluminum extrusion
with anti reflective polycarbonate screen and removable aluminum end,
caps.
Power Supply: This display has an in-built DC power. This power supply
has been set to the required AC voltage for the country of use.
Logic Control Board: Logic control board that receives RS485 serial data
from the data RJ45 connector.
Installation
The display is supplied with 2 wall mounting brackets, ceiling mounting kit,
PC connection plugs and wall fixings.
The Wallboard 10 displays all come with a 2-meter power cable provided
for mains supply. Ensure the voltage requirement is compatible with the
intended mains supply, and that the supply rating is greater than 5 Amp.
There are two methods of hanging the displays.
Wall Mounting
Fix the 2 wall mounting brackets using the cavity fixings provided. The
bracket is angled to allow a 10 degree downward tilt to the display. Please
ensure the brackets are the correct way up. See the diagram below.