Filter
Top Products
PC Configuration Server PC Setup – NT4
Compact Contact Center Installation & Maintenance
40DHB0002USBG Issue 1 (11/14/2001) PC Configuration
•
Page 10
Server PC Setup – NT4
1. Windows NT Server 4.0 Modifications
On a machine with Windows NT4 already installed, you need to check the
following settings.
1 The Computer Name needs to be ARCHIVERSQL.
2 The network protocol is TCP/IP.
3 Windows NT Server Service Pack 6a must have been installed. If you
are in doubt, install the service pack again.
4 Ensure that the Time Zone is set to local time [e.g. for UK set it to
English (United Kingdom)].
5 Make sure that the screen display properties have been set to the
following:
Desktop Area is set to 800 by 600 pixels. Color palette is set to
65536.
1.1 Create the C and SDX Shares
1. Double click on the My Computer Icon.
2. Click the right mouse button on drive C: and select Sharing from the
menu.
3. Click on the New Share button.
4. Enter SDXSHARE (Uppercase) in the Share name and ensure that the
user limit is set at Maximum Allowed.
5. Click on the OK button, then Click on the New Share button.
6. Enter C (Uppercase) in the Share name and ensure that the user limit is
set at Maximum Allowed.
7. Click on the OK button to close the screen.
8. Click on the Apply button and then the OK button.
1.2 Guest Account
1. Click Start; highlight Programs and then Administrative Tools.
2. Click on User Manager for Domains.
3. Double click on the Guest Account. Remove the check from the check
box of "Account Disabled".
4. Click OK and then close the User Manager for Domains screen.
1.3 Event Log Settings
1. Click Start; highlight Programs and then Administrative Tools.
2. Click on Event Viewer. Click Log and then Log Settings.
3. Select System from the drop down list. Select Overwrite Events as
needed.
4. Select Security from the drop down list. Select Overwrite Events as
needed.
5. Select Application from the drop down list. Select Overwrite Events
as needed.
6. Click OK and exit the Event Viewer.