Filter
Top Products
Getting Started 51
Connections tab
Icon Description
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan
for other Bluetooth devices.
Comm Manager Manage your device’s connections (including Wi-Fi,
GPRS, Bluetooth, and ActiveSync), turn the phone on or off, switch to
ringer/vibration mode, and enable or disable the Direct Push function.
Connections Set up one or more types of modem connections for your
device, such as phone dial-up, GPRS, Bluetooth, and more, so that your
device can connect to the Internet or a private local network.
CSD Line Type Set the line type to use when making a circuit switch
data (CSD) connection. Normally, you do not need to change the setting
unless you encounter a problem on establishing a connection.
GPRS Setting Set the GPRS authentication method. This has been
configured for the T-Mobile network.
USB to PC indicates a serial connection between your device and PC
using a USB cable. See "Troubleshooting sync connection problem" in
Chapter 5 for details.
Wi-Fi Scan for available wireless networks.
Wi-Fi Status See information about the active wireless network, and
customize Wi-Fi settings.