Filter
Top Products
Section Section 11 Getting StartedGetting Started
55
System Safety
If you do not understand and agree with all of the above safety
guidelines, do not use this product.
1. Never let the machine run unattended.
2. Any person near a running machine tool must wear safety goggles.
3. Allow only trained people to operate the machine. Anyone operating
this machine must have:
• Knowledge of machine tool operation.
• Knowledge of personal computer operation.
• Knowledge of Microsoft Windows .
• Good common sense.
4. Place safety guards around the machine to prevent injury from flying
objects. Anaheim Automation highly recommends building a
plexiglass safety shield around the entire tool envelope.
5. A computer-controlled machine tool is potentially dangerous.
Unexpected machine movement can occur at any time. Never place
any part of your body within the tool envelope while the machine is
online.
6. Be aware and on alert for computer crashes at all times.
7. Always keep the tool envelope tidy and free of any loose objects.
8. Anaheim Automation is not responsible for the safe installation and
use of this product. You and only you are responsible for the safety
of yourself and others during the operation of your CNC machine
tool. Anaheim Automation supplies this product but has no control
over how it is installed or used. Always be careful!
When running any machining operation, safety is of utmost
importance. For proper and safe use of the LC controls and
your CNC machine, the following safety guidelines must be
followed: