Filter
Top Products
Section Section 33 Initial SetupInitial Setup
3636
purpose safety switch, choose Safety and enter a Description. If the line is
unused, choose Unused. (Note: The “Control” option is not used by the
current version of the LC controller.)
3. Repeat for all 8 input lines.
Output Line Settings
Anaheim Automation’s LC software can control up to 8 output lines to activate
devices such as the spindle or coolant pump. You can manipulate any or all of the
output lines with user defined M codes. Please see the LC Hardware Guide for
more hardware details including the pin layout of the output line connector.
4 To Configure the Output Lines
1. Choose Output Lines from the Setup menu. The Output Lines Setup
dialog box will appear.
2. In the Description text boxes, type descriptions for each device connected
to the output lines.
4 To define an M-code to control output lines
1. In the M Code text box type the number for the M-code that you want to
define.
2. In the Description text box type a phrase which best describes the action
taken when this M-code is executed.
3. In the Output Line Action pull-down menus, choose the action for each
line upon execution of the M-code. The choices are On, Off, or “–“,
where the “-“ indicates that the state of the line remains unchanged.