Filter
Top Products
Section Section 44 System ProgrammingSystem Programming
4242
3. In the Drives pull-down menu choose the drive that contains the file.
4. In Folders list box, double-click the name of the folder that contains the
file. Continue double-clicking subfolders until you open the subfolder that
contains the file.
5. In the box that lists files, double-click the file name, or click on the file
name and choose OK.
6. The Save G-Code File dialog box appears asking you the name of the new
G-Code file created by the DXF import. By default, it will use the DXF
file name with an “.AGC” extension in the same drive and folder in which
the DXF file resides. If this is acceptable, choose OK.
4 To choose a different file name or folder
1. Choose the drive you want from the Drives pull-down menu.
2. Click on the folder you want in the Folder box.
3. Type the file name in the File name box, or type the entire path in the File
name box.
4. Choose OK.
5. The Import Setup dialog box will appear.
6. Fill in the values for each of the following fields:
7. Scale - A multiplication factor for the toolpath in the XY plane only. For
example, if you enter a 2 here, the toolpath generated will be double the