Filter
Top Products
Section Section 44 System ProgrammingSystem Programming
4545
1. Choose Open G-Code from the editor’s File menu. The Open G-Code
File dialog box appears.
2. In the “List files of type” pull-down menu, choose the type of file you are
looking for. Existing LC files will have an “.AGC” extension. If you are
unsure of the file type, choose “All Files (*.*).”
3. In the Drives pull-down menu choose the drive that contains the file.
4. In Folders list box, double-click the name of the folder that contains the
file. Continue double-clicking subfolders until you open the subfolder that
contains the file.
5. In the box that lists files, double-click the file name, or click on the file
name and choose OK.
4 To see your new tool path updated in the Tool Path View Port without
leaving the editor
1. Choose Update Tool Path.
4 To save your program using the same file name
1. Choose Save G-Code from the editor’s File menu.
2. If you’re saving a new file, a Save G-Code File dialog box will appear.
Follow the directions “To save a new program…” below starting with step
2.
4 To save a new program created by the editor, or to save an edited file
under a different file name
1. Choose Save G-Code As from the editor’s File menu.
2. Choose the drive you want from the Drives pull-down menu.
3. Click on the folder you want in the Folder box.
4. Type the file name in the File name box, or type the entire path in the File
name box.
5. Choose OK.
4 To close the editor
1. Choose Exit.