Filter
Top Products
Section Section 22 Main Screen FeaturesMain Screen Features
1919
Fast - Sets the jog rate to the fast jog rate specified in the Feedrate/Ramping Setup
dialog box.
Point Mode
Point mode provides controls for moving the tool to the XYZ position you enter at
the feedrate you specify. In order to avoid tool crashes, all moves with a positive
Z axis element will first move up to the desired Z coordinate and then move to the
desired XY position. All moves with a negative Z axis element will first move to
the desired XY position and then move down to the desired Z position.
Name - Provides a list of options for where to move:
Any Point - Moves to any XYZ point you enter.
Program Zero - Moves to Program Zero.
Machine Zero - Moves to Machine Zero (if defined).
Tool Change Position - Moves to the Tool Change Position defined in
Machine Coordinates in the Machine Tool Setup dialog box.
Program Start Point – Moves to where the tool was located when the
current G-Code program was started.
Current Line Start Point - Moves to where the tool was located when the
current G-Code line began execution.
Last Hold Point - Moves to where the tool was located when you stopped
G-Code execution using the Feed Hold button.