Filter
Top Products
Section Section 11 Getting StartedGetting Started
66
About this Manual
Anaheim Automation’s LC software is a unique Windows application, so you’ll
need some instruction to get started. Since automated machining is potentially
dangerous, please take the time to completely read through this manual to
understand the operation of the software and machine before cutting a part.
Please note that all LC terminology appears in boldface upon first occurrence and
is defined in the glossary.
It is assumed that you already have a working knowledge of the PC and
Windows. If you are not familiar with either of these, please review your PC or
Windows user’s guides before you use the LC controller.
Program Overview
Anaheim Automation’s LC software is a Windows based program that gives you
direct control of your machine tool while displaying real time graphics. With
Anaheim Automation’s LC software you can:
• Visualize and verify the tool path generated from a G-Code file.
• Watch the current position of the machine tool as it moves.
• See the current position of the machine tool in either Machine, Program,
Relative, or Distance-To-Go coordinates.
• Create, edit and display a G-Code program.
• Move the machine tools in any of four different modes: Jog, Point, G-Code, or
Home.
• Import DXF files.