Filter
Top Products
Section Section 22 Main Screen FeaturesMain Screen Features
1616
Control Box
The Control Box, shown below, contains all of the controls to move the machine
tool.
There are four modes:
G-Code - Moves the tool along the tool path specified by a G-Code
program.
Jog - Provides means to manually move the tool in all three axes.
Point - Moves the tool to any point you specify.
Home - Seeks the home switches for all three axes.
To change modes, simply click on the appropriate mode button. The operation of
each mode is described below.
Program
Tool Path
(Red)
Rapid Move
(dotted)
Path Already
Cut (Blue)
Current XY
Position
(Yellow)
Current Z
Height
Total Z
Travel