Filter
Top Products
System & Station
Program *10 – Enhanced 911 Operation
Strata DK Programming 5/00 3-43
System & Station
Programs *10-11 and *10-12 Overview
Programs 10-11 and 10-12 assign which QSTU2, KSTU2, RSTU2, RSTU, RDSU, PSTU, or
PESU standard telephone ports are connected to the E911 interface unit.
Important! Program 04 Directory Number data must be blank for E911 QSTU2, KSTU2,
RSTU2, or RSTU ports.
Program *10-91 – E911 Interdigit Timer
Initialized Default: 15 seconds
Program *10-91 Overview
*10-91 assigns the time allowed to dial each digit after dialing 9 when using the E911 feature. This
time will affect the time that LCR or CO Line dial tone is returned when dialing 9. However, a user
can dial a 9+ (non-911) calls normally before receiving LCR or CO line dial tone and the DK will
route the call appropriately.
Program *10-92 – E911 Pause Before Send Timer
Initialized Default: 0 - No pause
Program *10-92 Overview
*10-92 assigns the time the DK will wait before sending the Station Primary Directory Number to
the E911 SLT port after the E911 SLT port answers.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Interdigit Timer = 91 01~15 seconds
Interdigit Timer seconds
Pause Timer = 92 0 = No pause
1 = 1.5 second pause
2 = 3 second pause
Pause Timer seconds