Filter
Top Products
ISDN
Program *68-2 – Outbound CNIS Parameters
7-42 Strata DK Programming 5/00
Program *68-2 – Outbound CNIS Parameters
Processor Type: DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type: Trunk, PRI and BRI
Initialized Default: Blank
Program *68-2 Overview
This program defines the default Calling Party Number (CPN) for the ISDN trunk group used for
placing a call. The PSTN uses this Calling Party Number for the user provider Caller ID and
optionally may use it for billing the call.
The number sent is based on the call originator. The originator can be a tandem call, a station (with
or without DID), or a station with a designated number:
♦ For a tandem call, the CPN digits received are the digits that will be sent.
♦ For a direct station call, the default number assigned to the selected service and which is
programmed into the Strata DK as the CPN will be the number sent.
♦ For a fixed number, the system sends the number assigned in the system (in this program) or it
can use the DID programming to determine the number to be sent. Program *69 (DATA=Type
1 or 2) defines whether fixed numbers from this program are sent or if DID digits from
Program *09 are sent.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU 6SNU +ROG 6SNU +ROG
Trunk Groups Calling Party Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CPN = Enter the Calling Party
Number (CPN) 10 or 11 digits.
Enter the Trunk Group
(01~16)
SEL = 2