Filter
Top Products
Toll Restriction
Program 41 – Station Outgoing Call Restriction
4-6 Strata DK Programming 5/00
Program 41 – Station Outgoing Call Restriction
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Toll Restriction
Initialized Default: All LEDs Off for all CO lines (all stations can access all lines)
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor
CO Line
Range
[PDN] Port
Range
DISA Port
(R3.X)
Processor
CO Line
Range
[PDN] Port
Range
DISA Port
(R3.X)
DK14 001~004 000~009 010 B1CU 001~032 000~055 089
DK40i 001~012 000~027 035 B2CAU/BU 001~120 000~079 249
RCTUA 001~016 000~031 039 B3CAU/BU 001~120 000~239 249
RCTUBA/BB 001~048 000~079 089 B5CAU/BU 001~200 000~335 344
RCTUC/D 001~144 000~239 249
RCTUE/F 001~200 000~335 344
Port Number
Program 16
Line Group
Number
900~916 00~16
CO Line LED
Port
20
19
18
17
16
15
14
13
12
11
10
09
08
07
06
05
04
03
02
01
LED Buttons = CO Lines
Light LEDs for the port(s) that are
allowed access.
SELECT = Station Logical Port Numbers
To add a port range, enter XXX✱XXX (low port ✱ high port).
Press
6FUROO to advance or 3DJH to go back.
After programming, press:
• Vol▲ to turn all LEDs On
•
Vol▼ to turn all LEDs Off
•
0RGH + CO line number, then to display and advance
For R4.3 and higher: If a Tie line is assigned in Program 16 for Toll
Restriction and LCR on tandem calls, assign a class of service. Program ports
900~916 to match the Tie line group numbers 01~16, respectively.