Filter
Top Products
ISDN
Programs *66-2 and *66-4 – Call-by-Call Trunk Group Codes and Network ID
7-30 Strata DK Programming 5/00
Program *66-4 Call-by-Call Network ID
Processor Type: DK40i, all RCTUs (Release 4.0 or higher) and BCUs
Program Type: Trunk, PRI
Initialized Default: Blank
Program *66-4 Overview
Some Call-by-Call services are provided by inter-exchange carriers. These services need a
network ID code for call setup. When a Network ID Code is entered, the service parameters in
*66-2 must be blank.
If both the Service Parameter and the Network ID are programmed, Service Parameter has priority
and Network ID will be ignored.
Record Sheet
Use the record sheet for Program *66-2.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
SEL = 4 ID = Network ID Code
(3 or 4 digits)
Enter ISDN Trunk
Group Number