Filter
Top Products
System & Station
Program 71 – DNIS
3-156 Strata DK Programming 5/00
when the DNIS/Tie/ DNIS extension or ANI call forwards to VM. This program can also be used
with non-DNIS Tie and/or DID lines to assign VMID digits to normal Tie or DID numbers.
The last address in Program 71-4 can be used to assign a VMID code to ANI only lines (see Table
3-9). All ANI only lines will be directed to the same Voice Mailbox.
To assign an ANI only Tie/DID line to Program 71-4 assignments: Program 17, LED 05 must be
turned Off and LED 07 and 08 must be On for lines that receive ANI digits only.
Program 71-5 Overview
This program is used to assign names to each DNIS number. The names for each DNIS/Tie/DID
extension number is normally supplied by the customer. Each DNIS name can be up to 16
alphanumeric characters. The DNIS/Tie/DID extension name will display on a telephone’s LCD
when the DNIS/Tie/DID extension number rings the telephone directly or is transferred, Call
Forwarded, or Hunted to the telephone.
To assign a Tie/DID line to Program 71-5 assignments: Program 17, LED 05 must be turned On
for lines that should display DNIS/Tie/DID extension name tags. When a Tie/DID line receives
both DNIS and ANI digits on the same call, Program 17, LED 06 determines what information,
DNIS extension name or ANI number, will display as a priority when the line rings incoming to
the system.
This program can also be used with non-DNIS or ANI Tie and/or DID lines to display names,
associated with the Tie or DID numbers, on telephone LCDs. In this case, the normal Tie digit
assignments in Program 04 and/or DID digit assignments in Program 09 will not be active.
Important!
● An individual telephone user can disable/enable the DNIS name display by using the Mode 60/
61 function on his/her LCD telephone.
● The DNIS extension name can be assigned or not assigned to display as a priority over the
ANI display (in Program 17, LED 06) when both ANI and DNIS digits are received on the
same call.
● If a name is not assigned to a DNIS number, DN:XXXX will display on telephone LCDs when
the DNIS/Tie/DID line rings into the DK system (where XXXX = actual DNIS/Tie/DID digits
received).