Filter
Top Products
System & Station
Program 03 for DK40i – Flexible PCB Slot Assignments
3-4 Strata DK Programming 5/00
Program 03 for DK40i – Flexible PCB Slot Assignments
Processor Type: DK40i
Program Type: System
Initialized Default: PCB codes of PCBs installed prior to running Program 91-1 or Program 91-9
Code 00 for empty slots (15~18), Base KSU has codes for PCBs
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG Turn System Power Off (5 sec) then On
more codes
...or
SELECT = Slot Number (00, 11~18)
CARD = PCB Code (See Reference Table)
Run Program 91-2
Notes
● For systems containing ISDN PCBs, immediately after running
Program 03, make sure to run Program *60 to identify all
station (NT/LT) and CO (TE) BRI circuits for each BRI circuit
installed. Program *60 causes station port and CO line shifting
on PCBs installed in higher slots that follow the BRI PCBs.
● Consult DK40i configuration section to check that the DK40i is
configured properly.
● RPTU and RDTU can be installed in slot 15 or 17 only. If one of
these PCBs is installed in slot 17, then slot 18 must be left
vacant. If an RPTU or RDTU is installed in slot 15, then slots
16, 17, and 18 can be used for other PCBs.
● RWIU must be installed in slot 15 to provide 16 handsets or slot
17 to provided eight handsets.
DK40i Base KSU
DK40i Expansion KSU
TMAU2 DKU
TBSU,
TCOU,
TDDU or
TBUU
KSTU2 TCIU2
Slot Number
00 11 12 13 14
PCB Code
91, 92 or
98
62 or
64
00, 11, 16,
or 77
00 or
31
00 or
81
PCB Type
Options
Station/BRI
Port Numbers
CO/DID/BRI
Line Numbers
Cabinet Label
04 05 06 07
Slot Number
15 16 17 18
PCB Code
PCB Type
Options
Station/BRI Port Numbers
CO/Tie/DID/BRI/T1
Line Numbers
PCB Code Reference Table
PCB Fixed Slot Code Ports/Type
Common Control 91 None
Common Control w K4RCU3 92 4 DTMF/ABR
Common Control w/K5RCU or
K5RCU2
98 5 DTMF/ABR
PIOU/PIOUS/RSSU/PEPU 41 None
PEKU 21 8 EKT
PEKU with EOCU 22 8 EKT
PEKU with DSS 23 8 EKT
PEKU with EOCU, DSS 24 8 EKT
PESU 25 2 SLT/4 EKT
PESU with EOCU 26
KSTU2/RSTU2/Stratagy DK 31 4 SLT/8 SLT/8VM
TCOU/PCOU/RCOU/RGLU2 11 4/CO
RCOU + RCOS 17 8 Loop CO
Base Unit DKT CKTs, PDKU,
and RWIU
61 8 DKT
Base Unit DKT CKTs
& PDKU w/ DIU or SP-OCA
62 8 DKT
Base Unit DKT CKTs and
PDKU with DSS (w/ or w/o
DIU or SP-OCA)
64 8 DKT
KCDU 65 2/CO, 4 DKT
KCDU SP-OCA or DIU 66 2/CO, 4 DKT
RDSU (RSTS) 27 4 DKT/4 SLT
RDSU (RSTS) with DIU or
SP-OCA
28 4 DKT/4 SLT
RDDU/TDDU 16 4 DID Lines
RDTU
71 T1 Lines 8 ch. (R4.3)
72 T1 Lines 12 ch. (R4.3)
REMU 13 4-Tie Lines
RCIU2/RCIS/TCIU2 81 4 or 8 Caller ID
TBSU or RBSU 77 2 BRI S/T
TBUU or RBUU 75 BRI U interface (R4.3)
RBSU/RBSS 78 4 BRI S/T
RBUU/RBUS 76 2 BRI U ckts.
RPTU
83 12 PRI Lines (R4.3)
84 8 PRI Lines (R4.3)
TSIU No Code Required
None 00 None