Filter
Top Products
E911
Program *11-2 – CAMA Trunk Group Hunting Assignments
Strata DK Programming 5/00 8-7
E911
Program *11-2 – CAMA Trunk Group Hunting
Assignments
Processor Type: DK40i, all RCTUs and BCUs (Release 4.3)
Program Type: System
Initialized Default: Blank
Program *11-2 Overview
This program enables E911 calls to hunt for an idle line in a CAMA trunk group in the order
assigned in this program.
If all lines in a CAMA trunk group are in use, a new 911 call that attempts to connect to a busy
trunk group can hunt to another trunk group. If that group is busy, the call will hunt to another
CAMA trunk group until an idle group is found. E911 calls will hunt for an idle line in a CAMA
trunk group in the order assigned in this program. Within each CAMA trunk group, E911 calls will
hunt the lines in that group from the lowest numbered line to the highest numbered line. This
hunting operation is true if the lines in a CAMA trunk Group are CAMA trunks or normal CO
lines.
✱ ✱ ✱ ✱6SNU✱ +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Hunt from CAMA
Trunk Group
Hunt to CAMA Trunk
Group
01
02
03
04
05
06
07
08
DATA = Hunt to CAMA Trunk Group (01~08)Hunt from CAMA Trunk Group (01~08)