Toshiba DK424 Telephone User Manual


 
Least Cost Routing
Program 56 LCR Station Group Assignments
5-24 Strata DK Programming 5/00
Program 56 Overview
The purpose of this program is to assign all defined station ports to one of four or eight LCR
Station Groups (see Program 56, record sheet notes).
Station groups are completely independent of one another. Therefore, each station group must
be defined separately.
Software does not automatically assign the highest, all-inclusive routing priority to Class 1
stations, making all routes available to Class 2~8 stations available to Class 1 as well.
Instead, stations are assigned (partitioned) to independent groups. Flexible assignment of
routing definitions to groups is allowed, with no one groups definition affecting anothers.
Each groups route definitions are specified to activate separately according to the time
schedules set by Program 53. Enter the station group number next to the port number.
HMIS Example
LCR Station Group Assignments for LCR Plans 01, 02, and 08/16:
LCR Group Allows
Guest Rooms
01 All calls to be dialed by rooms.
02 Local Calls, 800/888, 911 only.
03 911 only.
Administration 04 As needed (most likely will be the same as Group 01).