Filter
Top Products
System & Station
Program 10-2 – System Assignments, Part 2 of 3
3-30 Strata DK Programming 5/00
Program 10-2 – System Assignments, Part 2 of 3
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: System
Initialized Default: LEDs 02, 14, 15, and 16 are On
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Button/
LED
X LED On LED Off
20 Padded DTMF Tone Return When Dialing DTMF/No DTMF Per Prog 10-2, LED 11
19 External Conference Amp Connected to PEKU No External Amplifier Connected
18 External Conference Amp Connected to PEKU No External Amplifier Connected
17 “TRNS” Soft Key—Immediate “TRNS” Soft Key—Normal
16 Executive Override Warning Tone/On Executive Override Warning Tone/Off
15 External Page included with All Call Page Not Included - see Button/LED 20 note.
14
Privacy Override/Attendant/Supervised Loop
Warning Tone/On
Privacy/Attendant Supervised Loop Override Warning Tone/
Off
13 Send Auto Callback Camp-on Tone
No Callback Tone. Called party receives notification tone
when calling party activates Auto Call Back.
12 CO Line 3 min Beep Tone No Beep Tone
11 No DTMF Tone Return When Dialing DTMF tone return when dialing
10 BGM connected to PESU, Circuit 8 EKT connected to PESU, CKT 8
09 BGM connected to PEKU, Circuit 3 EKT connected to PEKU, CKT 3
08
Elapsed Time Display 1 min. After Access or
Answer a CO line
Elapsed Time Display 15 sec. After Access or Answer a CO
Line
07 Standard Tel. CO Ring per Prog. 10-1, LED 06 Standard Tel. CO Ring Distinctive
06 VM ID Code DTMF Signal Time 80 ms 160 ms
05 Send Music-on-hold. Send Ringback Tone to the transferred party.
04 MW cancel from VM: RS-232 or dial
#64 + [DN] MW cancel from VM: Automatic When Answer
03 3 Ringing Modes 2 Ringing Modes
02 Hunt/C.F. override from DSS console's phone Hunt/C.F. override from DSS console
01 Tone First (from DSS Console)
Voice First (from DSS Console)
This applies to [PDNs] not [PhDNs]; [PhDNs] are always tone
first.
SELECT = 2 Light the LED Buttons that are marked with an X in
the table below.