Toll Restriction
Program 44-1~8 – Toll Restriction/Traveling Class Override Codes
Strata DK Programming 5/00 4-13
Toll Restriction
Program 44-1~8 – Toll Restriction/Traveling Class
Override Codes
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Toll Restriction
Initialized Default: All Classes Blank (no code)
Program 44-1~8 Overview
This program enables you to assign a code for each of the Toll Restriction classes established in
Program 46. If one of these codes is entered at a station, the station assumes the code’s class for
that call. When the call is complete, the station returns to its regular class assigned in Program 48.
The Traveling Class code data is not sent out the SMDR port and does not print out on station call
records. Account Codes (Forced or Voluntary) can also be used for this function, in which case the
Account Code will print out on SMDR (see Programs 69 and 70).
Notes
● Stations selected in Program 30, LED 16 On, can add, change, or delete the codes set in
Program 44-1~8.
● When the Toll Restriction Override code is dialed, the station's class (defined in Program 48)
changes to the class assigned to the code in Program 44-1~8.
● Do not use the same codes set in Program 45 (8 and 9).
● Stations enabled in Program 30, Button/LED 16 On, are allowed to enter and change Toll
Restriction Class (1~8) override codes.
✱ ✱ ✱ ✱ 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
Processor Toll Restriction Class Processor Toll Restriction Class
DK14 1~4 RCTUBA/BB, B1CU 1~4
DK40i 1~4 RCTUC/D, B2CAU/BU, B3CAU/BU 1~8
RCTUA 1~4 RCTUE/F, B5CAU/BU 1~8
Toll Restriction Class
SELECT =
DATA = (1~4 Digit Code)
1
2
3
4
5
6
7
8
DATA = Toll Restriction Code for Selected Class (1~4 digits)SELECT = Toll Restriction Class 1~8