Toshiba DK424 Telephone User Manual


 
Toll Restriction
Program 45-8~9 Toll Restriction Override Code
4-22 Strata DK Programming 5/00
Program 45-8~9 Toll Restriction Override Code
Processor Type: DK14, DK40i, all RCTUs and BCUs
Program Type: Toll Restriction
Initialized Default: Leaves code assignments blank
Program 45-8~9 Overview
This program enables selected stations in the system to alter the override code. These stations are
defined by their users - specified in Program 30, Button/LED 09.
Two different codes can be dialed by any station user to override station-specific restrictions.
These codes will not register on SMDR.
To change the codes from selected stations:
Code 1: [PDN] +
 + code + 5HGLDO
Code 2: [PDN] +  + code + 5HGLDO
Notes
Do not use the same four-digit codes set in Program 44-1~8, Toll Restriction/Traveling Class
Override codes.
Program 45 (8~9) overrides Program 44-1~8 if the same codes are used.
Electronic telephone users can use the button instead of the 5HGLDO button.
Verified Account Codes (Forced or Voluntary) can also be used to override Toll Restriction on
a call by call basis. When used for this function, the account code will register on the SMDR
report (see Programs 69 and 70).
   6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU +ROG
SELECT = Description DATA = (1 to 4 Digits)
8 (Code 1)
9 (Code 2)
DATA = Code
Enter 1 to 4-digit code from the table below.
Press LED Button 01 to delete or leave a blank.
Press LED Button 02 to allow all digits to work.
SELECT = Item 8 or 9
Enter 8 to select Code 1.
Enter 9 to select Code 2.