Filter
Top Products
245
Additional Information
I cannot perform an IrDA HotSync operation.
• Be sure the HotSync Manager is running and the Serial Port for local
operations is set to the simulated port for infrared communication.
• On your CLIE handheld, make sure the HotSync application is set to
Local, with the option IrDA to a PC/Handheld.
• Make sure the IrDA port of your CLIE handheld is aligned directly
opposite to, and within a few inches of, the infrared device of your
computer.
• IrDA HotSync operations do not work after you receive a low battery
warning. Check the battery power of your CLIE handheld. Recharge the
internal battery.
When I tap the HotSync button on the cradle, nothing happens
on the Palm Desktop for Sony software and my CLIE handheld
times out.
• Check Palm Desktop for Sony software HotSync Setup options to
confirm that you have the correct settings for local HotSync operations.
• If you are experiencing intermittent success, try a lower speed setting on
the Local tab in the Setup dialog box in the HotSync Manager.
• Close and restart HotSync Manager on your computer.
• Make a copy of your Palm folder. Uninstall, then reinstall Palm Desktop
for Sony software.
• Turn on your CLIE handheld and tap the Home icon
. Tap the
HotSync icon, then tap Local.
When I perform a HotSync operation, my information does not
transfer to Palm Desktop for Sony software.
• If you have performed a HotSync operation successfully, but you cannot
find the data from your CLIE handheld on Palm Desktop for Sony
software, check to see you have the correct user name selected for
viewing data.
• Click the HotSync Manager and choose Custom. Check that all conduits
are set to synchronize files.