Filter
Top Products
232
Setting Up Your CLIE Handheld
Changing the digitizer preferences
The “Digitizer Preferences” screen opens the digitizer calibration screen.
This is the same screen that appears when you start your CLIE handheld for
the first time.
You can recalibrate your screen after a hard reset, or if your digitizer drifts.
On the “Preferences” screen, select “Digitizer” from the drop-
down list in the upper-right corner.
The “Digitizer display alignment” screen appears.
This screen is also displayed when you start up your CLIE handheld
for the first time.
From the second time you use your CLIE handheld, you can change
the digitizer preferences following the instructions which appear on the
screen.