Filter
Top Products
Access Codes
142
If you enter an incorrect PIN three times in succession, the code is
disabled and cannot be used until you re-enable it by entering the
PUK (see below).
PUK
The 8-digit PUK (PIN Unblocking Key) is required to change a
disabled PIN. The PUK may be supplied with the SIM card. If not, or
you have lost it, contact your service provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft key.
3. When the Confirm New PIN message displays, enter the same
code again and press the OK soft key.
If you enter an incorrect PUK ten times in succession, the SIM card
becomes invalid. Contact your service provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is required to
access specific functions, such as setting the maximum cost of a
call. These functions are available if supported by your SIM card.
If you enter an incorrect PIN2 three times in succession, the code is
disabled and you cannot access the functions until you re-enable it
by entering the PUK2.
To change the PIN2, see page 136 (Menu 9.7.8).
To See
activate/deactivate the PIN Check
feature
page 133 (
Menu 9.7.1).
change the PIN
page 134 (
Menu 9.7.2).
T609.book Page 142 Monday, April 17, 2006 10:30 PM