Filter
Top Products
Settings
138
Voice recognition settings
You can adjust the settings and preferences for VoiceSignal by
opening the Voice recognition settings menu (Menu 9.9).
To access the VoiceSignal Settings menu:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Using the Navigation keys, scroll to the Settings icon. Press the
Select soft key or the key to enter the menu.
3. Highlight Voice recognition settings and press the Select soft
key or the key.
Note: You can also access the VoiceSignal Settings menu, while in the VoiceSignal
application by pressing the Settings soft key.
The following options are available:
♦Choice lists: if VoiceSignal is not absolutely confident that it has
correctly identified a name or number, it can display a choice list of
up to three possibilities, and prompt you to confirm the correct
one. You can control when choice lists appear by changing the
Choice Lists setting to the following:
● Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
● Always On: when there are multiple alternatives, VoiceSignal
always displays a choice list.
● Always Off: VoiceSignal never displays a choice list. Instead, the
application picks the best from among the possible choices.
♦Sensitivity: in VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone frequently
does not recognize names, numbers, or commands, and rejecting
too little, which means it frequently recognizes something even if
nothing was said. When VoiceSignal rejects an utterance, it
displays a message such as “Please repeat…” or “No match
found.” If you frequently experience these messages, you might be
able to get better recognition by adjusting the Sensitivity setting
T609.book Page 138 Monday, April 17, 2006 10:30 PM