Filter
Top Products
Settings
131
Settings
1. Highlight the Search now option and press the Select soft key or
the key.
2. Press the Up or Down Navigation key until the network you want
highlights and then press the Select soft key or the key.
The phone will scan for that network and you will be connected.
To change you Default setup:
1. Highlight Default setup and press the Select soft key or the
key.
2. In the Network Selection menu, select either Automatic or
Manual and press the OK soft key.
If you select Automatic, you are connected to the first available
network when roaming.
If you select Manual, the phone scans for the available
networks. Go to step 3.
3. Press the Up or Down navigation keys until the network you
want is highlighted and then press the OK soft key.
You are connected to that network.
Caller ID
You can prevent your phone number from being displayed on the
phone of the person being called.
Note: Some networks do not allow the user to change this setting.
The following options are available:
♦Default: the default setting provided by the network is used.
♦Hide number: your number does not display on the other person’s
phone.
T609.book Page 131 Monday, April 17, 2006 10:30 PM