Filter
Top Products
Editing a Preset’s Name
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Preset].
4. In the [Preset] list, touch and hold the preset whose
name you want to edit.
5. Tap [Edit Preset Name].
6. Edit the preset’s name as necessary, and then tap
[OK].
Note
• Tapping [Cancel] returns you to the [Preset]
screen.
• For details about entering text, see page 23.
Deleting a Preset’s Name that You
Edited
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Preset].
4. In the [Preset] list, touch and hold the preset whose
name you want to delete.
5. Tap [Delete Preset Name].
Note
• Deleting a preset’s name returns it to the factory
default value (Preset).
• Tapping [Cancel] returns you to the [Preset]
screen.
Configuring Display
Properties
You can adjust the brightness of the network camera
and set up automatic mode.
Adjusting the Brightness of the
Picture
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Camera Settings].
4. Tap [Brightness].
5. Tap
(brighter) or (darker) to adjust the
brightness.
6. Tap [Close] to save the setting.
Note
• Tapping [Reset] in step 5 returns the setting to
the value specified in the camera’s settings.
Automatic Mode
Auto Pan
The camera can be set to pan horizontally (left–right)
over its entire viewing range repeatedly.
1. On the Home screen, tap
.
2. In Network Camera Viewer, press .
3. Tap [Camera Settings].
4. Tap [Auto Mode].
5. On the [Auto Mode] screen, tap [Auto Pan].
Note
• Tapping [Cancel] returns you to the [Camera
Settings] screen.
Preset Sequence
You can have the camera cycle through and display
viewing positions registered as presets.
1. On the Home screen, tap .
2. In Network Camera Viewer, press .
3. Tap [Camera Settings].
4. Tap [Auto Mode].
64 Operating Instructions Document Version 2011-09
Network Camera